Home > Equipment > Pumps / Flow / Tubing > Tubing >

SS Hose Clamp, Liner Clamp For Silicone Tubing
SS Hose Clamp, Liner Clamp For Silicone Tubing
 
Our Price: $1.50


Free Shipping
Product Code: HOSECLAMP


Hose Clamp Size:

Qty:  
Description
 
These SS Hose Clamps are quality pieces made in the USA. The Breeze 9400 series are known as liner clamps which has a smooth metal band on the inside to protect soft tubing from getting squeezed out through the spiral slots in cheaper clamps. Big price drop on these! We're charging the bulk pack price for as many or few as you need.

Liner clamp sizes available below, both have a 1/2" wide band.

Medium Size, Model 9406 - 7/16" - 25/32" (11mm - 20mm) - Appropriate for 3/8" ID or 1/2" ID silicone over a 1/2" hose barb. If you use camlocks, this size clamp is only appropriate for regular cam C.

Large Size, Model 9408 - 1/2" - 7/8" Diameter (13mm - 23mm) - Appropriate for 1/2" ID silicone over a 1/2"-5/8" hose barb. Note, if you use camlocks, this is the size you want for 1/2" ID silicone over a Big C, Big E, or BL.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 60 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
3 of 5 Watch your sizing! January 4, 2024
Reviewer: Anonymous Person  
Maybe I had an odd use intended of going over a copper immersion chiller with silicone hose, but these don't crank down to that size. The key is that 1/2" hose barb in the description for the medium size. My hose is 1/2" OD but since the chiller is thinner, it's not even close to tight, even though I cranked down all the way for a long time. I guess a small size (not offered) might work.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Frosting on the cake! November 25, 2022
Reviewer: Jay Hager from Bend, OR United States  
These clamps actually stay round when you tighten them down and they don't have sharp edges to cut your fingers on.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Smoother inside = less chewed up hose September 20, 2020
Reviewer: Rich W. from San Diego, CA United States  
I mostly use oetiker clamps because they don't chew up the silicone hose when tightened down. But the downside, you can't remove and reuse them. That's why I got these. I have the 1/2" Blichmann Thrumometer and need to disconnect it after a brew cycle. So these clamps are nice to use for that connection.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect for silicone hoses June 4, 2020
Reviewer: Brian from Dayton, OH United States  
Totally worth it.  Will not damage my silicone hoses no matter how tight I crank my wrench.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 13, 2020
Reviewer: Adam from Ohio  
Works perfectly. I use these to hold 1/2" silicone tubing on 5/8" barbs.

Was this review helpful to you?

View All Customer Reviews