Return to TRUE Weldless 1.5" TC Triclamp Bulkhead - Double Sided

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

0 of 0 people found the following review helpful:

Great Product July 30, 2024 Reviewer: Jason Rausch from Houston, TX United States   I was having trouble finding someone to weld stainless for me then I came across the bulkhead.  The installation was easy and work as good as if I got the piece welded. Was this review helpful to you?

0 of 0 people found the following review helpful:

Works Pretty Well December 10, 2020 Reviewer: Jason from WI   I have to start by explaining that I'm using this on an Anvil Foundry system. I'm using this to turn the pre-drilled hole in the lid into a port based on the Steam Slayer instructions for the Foundry. I'm not running the Steam Slayer, but I'm using the same hole and turning it into a TC port. That said, this product "sort of" works. The hole in the Foundry is 1-7/8". The fitting is built for a 1-5/8" hole. So the the 2 sides of the fitting tend to just tighten up against each other as opposed to "sandwiching" a portion of the lid in between them. As a result the fitting kind of sits in the hole and is a little loose and wobbly. However, it may still function this way. I decided to modify it slightly by buying a 1-5/8" ID teflon gasket and mounting it to the side of the lid opposite the o-ring. It gives the fitting a little more surface area to bite down on and makes it a little more secure. All-in-all, it works for what I'm using it for, and it's a nicely machined part. Was this review helpful to you?

0 of 0 people found the following review helpful:

October 26, 2019 Reviewer: Stephen Cheng from Burke, VA United States   Very heavy duty Was this review helpful to you?

0 of 0 people found the following review helpful:

Brilliant piece July 1, 2019 Reviewer: Ed Shultz from Vista, CA United States   Very high quality and well built.  My kettle is 18" in diameter and it seals up just fine.  I highly recommend getting his 40mm tungsten hole saw for the installation.  Use a high torque drill and take your time. Was this review helpful to you?

0 of 0 people found the following review helpful:

HEAVY January 2, 2018 Reviewer: Mac Lamken from Blue Springs, MO United States   This thing is solid. Heavy, perfect for putting a through tri-clamp on a pilot system kettle lid. Doesn't leak, didn't from the beginning (I used plumber's tape), and it does everything I want it to do. Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent quality February 16, 2017 Reviewer: Dean Palmer from St Petersburg, FL United States   These are a great alternative to finding and paying a qualified welder to install TC ferrules. No more reason to spend that kind of money when there is now a better way to accomplish the task. I've started suggesting these to local brewers, and I used to do a lot of the welding. This is so much easier and totally reliable. They are also so well made they look like jewelry for your rig :-) Was this review helpful to you?