Home > Equipment > Keg, Pot, Cooler Parts > Kettle Whirlpool >

Spincycle Robo, Whirlpool Return for Robobrew Pumped Units
Spincycle Robo, Whirlpool Return for Robobrew Pumped Units
 
Alternative Views:
Our Price: $32.00

Quantity in Stock:8

Free Shipping
Product Code: SPINCYCLEROBO
Qty:



The following items are included with this product:
Description
 
If you have a V3 Robobrew with the pump, you want this whirlpool. The Robobrew comes with a SS immersion chilling coil and chilling times are greatly reduced if you keep the wort stirring. You could do it with a spoon but since you already have a pump, dropping in this retrofit whirlpool will do the job for you while you kick back with a beer.

Since the V3 Robobrew's mash re circulation tube terminates up top with a female camlock, we simply TIG welded a male camlock to some custom bent 3/8" OD SS tubing that goes up, over, and then down to about the 3 gallon mark.

We've received reports of our male camlock not fully seating in some of the cam females that area preinstalled on the robobrew unit. Since we cannot anticipate when those units will be out of spec, we have decided to include a replacement type D camlock to ensure absolute compatibility. You'll just have to unthread the existing cam D off the valve and put the new one on.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 8 Click Here to Write a Review »

  2 of 2 people found the following review helpful:
 
5 of 5 Can use with grainfather March 1, 2021
Reviewer: Zer0 from Salt Lake City, UT United States  
Works with grainfather that has been camlock converted if you're willing to bend the SS tubing slightly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Works great on the Brewzilla 65L September 23, 2019
Reviewer: Brian Miller from Laguna Hills, CA United States  
I just brewed with this and it worked great! The included camlock fitting worked perfectly with the whirlpool arm. If you have an immersion chiller make sure the cold water goes to the bottom of the chiller first for optimal chilling speed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product September 19, 2019
Reviewer: Dennis ONeill from Reading, PA United States  
The whirlpool arm looks well made connects to the existing cam lock a little tight but fits they also added a matched set of cams if your cam doesn’t work can’t wait to do a run and test it out.
The delivery was quick and well packed thanks guys two thumbs up will shop here again

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
1 of 5 Does not fit my Robobrew V3 March 27, 2019
Reviewer: Anonymous Person from Oakland, CA United States  
*******************
Brewhardware.com Response: We have sold 100 of these so far and the reports of non-compatibility with the Cam D that is preinstalled on the ROBO is in the single digits. This suggests that there is an issue with the Cam D where the units female/male are a matched pair but perhaps without regard to the Mil-Spec standard. We've decided to force the issue by including a new Cam D to ensure compatibility.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 February 24, 2019
Reviewer: Thomas Manning from grayslake, IL United States  
Works great, does exactly what it’s intended to do

Was this review helpful to you?

View All Customer Reviews