Pump Connection Kit, Camlocks, Drain Mount for Topsflo Pumps

Home > Equipment > Pumps / Flow / Tubing > Tubing >

Our Price: $49.00

Product Code: PUMPCONCAMTOPS

Qty:

The following items are included with this product:

1 of 2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium ($13.99 value!)
1 of Camlock Quick Disconnects - Cam B ($6.25 value!)
1 of Camlock Quick Disconnects - Cam Big C ($8.00 value!)
1 of Camlock Quick Disconnects - Cam Kit BL ($13.25 value!)
1 of Camlock Quick Disconnects - Cam F ($4.50 value!)
1 of NPT Threaded Elbow, 90 Degrees, F/F - 1/2" NPT ($3.50 value!)
2 of SS OETIKER Hose Clamps - 1" (25mm) Max OD ($0.58 value!)
3 of Silicone Tubing, Made in USA, 1/2" ID x 3/4" OD (1/8" Thick Walls) PER FOOT ($8.25 value!)

Description

This is a departure from most of the other pump connection kits in that it's designed to mount the compact, light-weight, Topsflo pump directly to any port that has a male (camF) camlock on it. Aside from the cost savings of eliminating the input hose set, the pump primes and performs better and reduces the output hose length requirement as well. The kit includes:

(1) Cam B to clamp onto your existing Cam F male.

(1) 1/2" NPT elbow to change directions and thread on to the pump inlet.

(1) 2pc SS ball valve for "out" port of the pump to control flow speed (upgradable to 3pc below)

(1) Type F camlock male for the output of the pump valve

(3) Feet of 1/2" ID ultraclear, high temp silicone tubing (you may add additional length as an upgrade accessory)

(1) Type BigC barbed Female camlocks for one end of the tubing on the pump side (straight connection)

(1) Type BL camlock - Type B with high flow elbow barbs (right angle for vessel connections to whirlpool or lid recirc arm)

(2) SS Oetiker clamps preclamped before leaving our shop.

These kits do NOT include the pump, or the male camlocks that need to be attached to your donor/recipient vessels or devices. Since it's impossible to anticipate all needs in options here, please go to the the camlocks page for these items or select them in the accessories section below. Hint: most drains require a type F cam to be threaded into the ball valve but look carefully.

Accessories

Camlock Quick Disconnects - Cam F

Silicone Tubing, Made in USA, 1/2" ID x 3/4" OD (1/8" Thick Walls) PER FOOT

Kit Ball Valve Upgrade - 2pc to 3pc (use only if ordering kit with 2pc Valve as standard)

Our Price: $4.50

Add

Our Price: $2.75

Add

Our Price: $5.00

Add

Share your knowledge of this product. Be the first to write a review »