 |
 |
 |
|
This connectivity kit is the fastest way to get your pump plumbing figured out and added to the shopping cart. Keep in mind we have a version of this kit for all common pump types using either Camlock (cam and groove) or BLQD type quick disconnects. This particular kit is based on camlocks and is meant for the Chugger, March or similar pumps with a 3/4" center inlet and 1/2" ouput. It includes:
(1) Cam A Custom 3/4 for the inlet side of the pump
(1) 2pc SS ball valve for "out" port of the pump to control flow speed (upgradable to 3pc below)
(1) Type F camlock male for the output of the pump valve
(10) Feet of 1/2" ID ultraclear, high temp silicone tubing (you may additional length as an upgrade accessory)
(2) Type BigC barbed Female camlocks for each end of tubing on the pump sides (straight connection)
(2) Type BL camlocks - Type B with high flow elbow barbs (right angle for vessel connections)
(4) SS hose clamps (unless you select the option for pre-assembly of the hoses in which case we use oetiker style clamps)
These kits do NOT include the pump, or the male camlocks that need to be attached to your donor/recipient vessels or devices. Since it's impossible to anticipate all needs in options here, please go to the the camlocks page for these items or select them in the accessories section below. Hint: most drains require a type F cam to be threaded into the ball valve but look carefully.
Options:
We've added a pre-assembly service to these kits. By default we simply ship you a full 10ft length of tubing and loose fittings and clamps that must be assembled.
If you select one of the assembly options, we will pre-assemble the cam BLs with teflon tape, cut the silicone to the lengths of your choosing and clamp it to the camlocks using oetiker style clamps for a neat finish.
If you add up the individual costs of the components, you'll find that the kit is discounted by a few dollars.
Brewery Pumps and Connections
How to get tubing over larger oversized barbs
|
|
|
 |
|
 |
|
Anvil pump update 
