Heating Element Kit, 1650 watt TC, Weld or solder TC, Clamp, Gasket

Home > Equipment > Electric Brewing > Heating Elements >

Our Price: $78.50

Product Code: ELEMENTKIT1650_TC_WELD

Qty:

The following items are included with this product:

1 of Heating Element, TC integrated 1650 watt (120v), All Stainless Steel ($65.00 value!)
1 of 1.5 TC Clamp ($7.00 value!)
1 of 1.5 TC Silicone Gasket (Heat Resistant to 400F) ($2.00 value!)
1 of 1.5 TC LONG Weld Ferrule ($4.60 value!)

Description

If you don't have anything on your kettle and you want an easily removable element, this kit is for you. This version requires TIG Welding or Silver Soldering

The included parts are shown in the picture; 1650 watt integrated TC element, TC clamp, TC gasket, TC weld ferrule. The TC weld ferrule is usually TIG welded into your pot by a QUALIFIED welder. You can also silver solder the weld ferrule into your pot. This requires a 1-1/4" hole to be drilled and you will also need our silver solder kit and pull through install tool.

Element length is approximately 9.25" Long to the TC flange. With the added 1/2"-3/4" from the TC flange, your pot must be at least 9" in diameter.

Everything is 304 High polish stainless steel.

These are made in China. Warranty is 3 months from date of purchase and does NOT cover damage due to dry firing. These elements must be submerged in liquid any time power is applied.

It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.

Instructions

Accessories

Cable, 10/3 Extension Cord EIGHT FEET (8') Nema L6-30 Male and Female

Cable, 10/3 Extension Cord TEN FEET (10') Nema L6-30 Male and Female

Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle (approx 5ft)

Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux)

Our Price: $39.00

Add

Our Price: $42.00

Add

Our Price: $26.99

Add

Our Price: $12.99

Add

Install Tool (pull through flaring) for 1.5" TC Weld Ferrules

Tungsten Carbide Hole Saw Drill Bit, 32mm or 1-1/4, for Stainless Steel

Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot

Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps

Our Price: $29.99

Add

Our Price: $16.00

Add

Our Price: $2.99

Add

Our Price: $14.99

Add

Plug, Nema L6-30P Twist Lock Plug for 240v, 30 amps

Our Price: $9.99

Add

Plug, Nema L6-30P Twist Lock Plug for 240v, 30 amps

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 2 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Absolutely Amazing!	January 26, 2020
Reviewer: Dylan Peters from Tamaqua, PA United States

Bobby went out of his way to make sure I was completely satisfied with this product. First, he talked me out of a more expensive setup that he sells to better fit my eBrewing (BIAB) needs, then he stayed at his shop to do the labor while I was there even though he was getting ready to leave.

The product itself is pretty amazing. I have a hybrid setup with propane & electric. I use the electric to heat up my strike water to close to what I need (with a small blue flame) and then again to get up to boiling, but this element could easily get 7 gallons boiling if I had the patience. Anyway, I used the propane to get it to 200 degrees and the electric did the rest and maintained a rigorous boil for 60 minutes!

I have insulated my kettle and am going to try a 100% electric brew this week. If you don't have access to a 220V, don't fret. BUY THIS ELEMENT NOW!

Was this review helpful to you?

0 of 0 people found the following review helpful:

	February 4, 2019
Reviewer: Dennis Peterson from Rayville, MO United States

Was this review helpful to you?