Return to Clip-On Trub Guard

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 2

0 of 0 people found the following review helpful:

Simple and effective November 26, 2023 Reviewer: Steve Sibelman from Portland, OR   I wish I could post a picture of the fine result this handy widget achieves.  Together with whirlpooling, it really helps keep trub away from the kettle outlet. Was this review helpful to you?

0 of 0 people found the following review helpful:

Substantial help keeping trub in kettle April 17, 2023 Reviewer: Steve Sibelman from Beaverton, OR United States   No trub guard can be 100% effective, but this one clips nicely to the "shorty" pickup tube in my Spike kettle and retains considerable trub that would otherwise go into the fermenter.  Easy to use, and reasonably priced. Was this review helpful to you?

0 of 0 people found the following review helpful:

Useful August 10, 2021 Reviewer: Odin Anderson from Bellevue, WA United States   I have an inverted keggle, so I knew I'd have to grind the bottom edge to a curve. That was no problem. It was a good component to start with but the little tack weld on the clip is a bit sketchy. I would have liked something with a much more adjustable clip.  And since there was no picture of the clip, I didn't know before I purchased it. Maybe an adjustable screw to change the distance between the pickup tune and the guard. Was this review helpful to you?

4 of 4 people found the following review helpful:

Not sure the clip would work, but it does. September 27, 2019 Reviewer: Dave from Bend, OR United States   Wasn't sure how the clip would work specificaly on my Spike kettle with the 5/8" side pickup tube.  There's no photo of the clip side to show exactly how the clip works. Well, the clip fits nicely on my pickup tube. Snaps right on. After whirlpooling (I hand stir) the guard works as designed to allow you to get (almost) the last sips of wort as the turb mound starts its collapse and spread. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great! February 25, 2017 Reviewer: Dan Ledbetter from Rio Rancho, NM United States   Keep the gunk out! Was this review helpful to you?

0 of 0 people found the following review helpful:

did not work as well as I hoped February 3, 2017 Reviewer: STEVE MICELI from Holmen, WI United States   I used this on a standard elbow.. It tilted up slightly and did not function well..  Wish you made the proper elbow this is designed for with  Male threads. Was this review helpful to you?

0 of 0 people found the following review helpful:

Good for clearer wort January 17, 2017 Reviewer: Bob C from East Amherst, NY United States   Does the job but would like to see it come with a silicone boot on the bottom. Was this review helpful to you?

1 of 1 people found the following review helpful:

This really works July 29, 2016 Reviewer: Gregg Pessin from Kirkwood, MO United States   I had some doubts about the trub guard but it did the job. I whirlpooled the wort and then transferred to my fermenter. All the trub was further in than the guard.  Afterwards it was easy to clean. Finally solved my trub issue. Was this review helpful to you?

0 of 0 people found the following review helpful:

This trub guard actually worked June 1, 2016 Reviewer: Black Dog Brewery from New York   I did my first transfer from the BK to the fermenter last weekend using this trub guard. It clips on perfectly to the 1/2" NPT stainless elbow. The guard left much more hot break / cold break material in the BK without getting sucked into the fermenter. Was this review helpful to you?

1 of 1 people found the following review helpful:

I looked for this solution long tine ago. May 29, 2016 Reviewer: Philip Levin Slesarev from Tel Aviv, Dan Israel   seems like the best solution that will keep the trub out of my fermentation vessels. Was this review helpful to you?