Return to 1/4 Male FLARE (MFL) to 1/4" Hose Barb

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

0 of 0 people found the following review helpful:

April 26, 2022 Reviewer: Genius of beer and parts from Carlsbad, CA United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Exactly what I needed March 9, 2020 Reviewer: Jeff Rieder from Cleves, OH United States   I used this with a solid Fermonster lid to give me a port to connect CO2 for pressure transfers.  Worked great! Was this review helpful to you?

0 of 0 people found the following review helpful:

A needed little pice May 10, 2019 Reviewer: Anonymous Person from Candor , NC United States   I recently got a beer gun to replace a picnic tap. Unfortunately the beer gun is not available with a MFL fitting to attach it to the beer line so I was able to find this male threaded MFL fitting, and I used a short beer line between the beer gun barb and the male MFL barb. Connected to my existing beer line and it works great Was this review helpful to you?

0 of 0 people found the following review helpful:

Great for using CO2 around the brewhouse March 2, 2018 Reviewer: Brian Maude from Calgary, AB Canada   Purchased this to attach to the female fitting I have on an extra 5lb tank I use for purging kegs etc so I can easily switch between the hose barb or a QD. I use the barb to push CO2 into a fermonster for closed transfers. Just drilled some small holes in a solid #10 bung. CO2 in, beer out via racking cane to keg. Works great! Was this review helpful to you?

0 of 0 people found the following review helpful:

Exactly what I needed - good quality, too. September 24, 2017 Reviewer: Rob from NH United States   Using a small piece of tubing, I attached this to the gas-in barb on my keg coupler so that it would work with my kegerator lines, which have swivel nuts on their ends. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great quality July 6, 2017 Reviewer: John Stepikura from Manalapan, NJ United States   Nice quality Was this review helpful to you?

0 of 0 people found the following review helpful:

Great price on the hardware and shipping March 2, 2017 Reviewer: John from Spring Lake, MI United States   Overall I was pleased with my order of the 2 pieces I needed.  My local HBS store didn't have the fittings I needed, and there were plenty of online stores that carried this sub $5 piece. The problem I had, was every other place charged a ridiculous amount for shipping a small fitting. But BrewHardware did not - and that is why I went with them.  They charged actual shipping for it - and it earned my business.   Now they are on my list of online suppliers where I know I'll get a fair price with fair shipping. Thanks. Was this review helpful to you?