Return to 52mm Socket Tool for Weldless 1.5" TC Bulkhead

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 2

0 of 0 people found the following review helpful:

Does what it needs to do April 16, 2024 Reviewer: Jake Jones from PEARLAND, TX United States   Socket worked great for installing my weldless TC Port in the lid of my kettle.  Thanks for offering it here so I wasn't on a wild goose chase at the hardware store! Was this review helpful to you?

0 of 0 people found the following review helpful:

52mm Socket Tool is worth it May 31, 2023 Reviewer: Bryan Miller from Pittsburgh, PA United States   The tool makes installing the weldless bulkhead fittings just a bit easier.  Well with it considering what it costs. Was this review helpful to you?

0 of 0 people found the following review helpful:

December 31, 2021 Reviewer: Jim Sumrall from Thompsons Station, TN United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Does what is says it does December 10, 2020 Reviewer: Jason from WI   It's a socket. It's the right size. It's inexpensive. It's exactly what it's describes as. If all you need it for is to install a TC bulkhead, just buy it. It works for it's intended purpose. You aren't going to find it cheaper somewhere else, and Bobby was nice enough to do all the research and source it for you. So buy the D**N socket now so you don't have to pay an additional $8 shipping just to get the socket when you realize later you really do need it. That's my friendly PSA for today.   : ) Was this review helpful to you?

0 of 0 people found the following review helpful:

A must have for a tight fit October 30, 2020 Reviewer: JC from Quincy, MA United States   This is by far the most economical socket you can purchase to secure a large 52mm nut onto a triclamp bulkhead fitting.  After looking around, I came back to Brewhardware and pulled the trigger.  It's well made, attached easily to my impact wrench and tightened down my connection with ease.  Great, affordable product - kudos again, BrewHardware! Was this review helpful to you?

0 of 0 people found the following review helpful:

Worked like a champ. September 11, 2020 Reviewer: Benny Stetson from FORT BELVOIR, VA United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Great tool August 14, 2020 Reviewer: Todd Coffey from Jackson, MI United States   Must have.  Makes tightening the nut a breeze Was this review helpful to you?

0 of 0 people found the following review helpful:

Perfect tool for the install! June 27, 2020 Reviewer: Gary Russell from WAKE FOREST, NC United States   I used this when installing TRUE Weldless 1.5" TC Triclamp Bulkhead in 2 kettles. It's perfect for the job and thanks for recommending the tool! Highly recommend. Was this review helpful to you?

0 of 0 people found the following review helpful:

September 8, 2019 Reviewer: Doug Kellis from BOISE, ID United States   Was this review helpful to you?

0 of 0 people found the following review helpful:

Works August 9, 2019 Reviewer: Jordan Brandt from Washington, DC United States   Quality is fine. Very convenient to grab this here over trying to source it yourself. Was this review helpful to you?