 |
Dang It! Hey, it's cool, everyone makes mistakes.
If you have a 13/16" or 7/8" (actual size) hole in your pot and need to plug it, this weldless assembly is what you need to make a clean leak-free repair.
The Dang-It slim plug is based on the industry leading True Bulkhead design with the oring capturing groove. Instead of putting a bulky hex on the front side, we put a screw driver slot on the back to hold the body in place as you tighten the included locknut. That left the front smooth so we could put a goofy name on the front.
OPTIONS:
You can opt to delete the locknut from this purchase if you already have a locknut. You would also delete the locknut if you plan to use this to plug a welded female NPT port. In most cases the plug will thread in far enough for the oring to make the seal. If not, teflon tape will have to be used. Either way, it's cleaner than a standard NPT plug.
We also offer this unit in a 1/4" NPT version which will fill 1/2 or 9/16" holes. Find that elsewhere.
|
|
|
Good Plug 
Small snafu