This is one of the only CIP balls available in the industry that works very well on relatively low pressure brewing pumps from the Blichmann Riptide all the way down to the MarkII and Topflo TD5 and everything in between.
This CIP ball will also fit through a 1.5" TC port with a standard 1-3/8" bore. This
allows the blow off tube to be swapped out with the CIP ball after
fermentation. This works especially well with cleaning the temp control coil. We recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny conical. NOTE: DO NOT leave PBW solution to cool in your equipment overnight. If you have hard water, it will leave a scale on the surface. Rinse well with hot water after draining out the PBW.
Specs:
-1.5" TC x 1.5" TC
-304SS
-Low flow design
We stock some Spike items at our NJ warehouse but most orders will be drop shipped directly from Spike. Assume additional lead times outside of our control unless you've called and we confirmed we have stock on a particular item. When you spend $130 on SPIKE items and they are the only thing on the order, you will get free shipping. Any non-Spike items on the order will incur normal shippping charges unless you meet the $299 free shipping threshold.
Easy cleaning! 
